General Wire

The J-3055 has the power to clear your most stubborn grease stoppages. Its 3000 psi, 5.5 gallon per minute triplex pump has the thrust to pull the hose down long runs, the pressure to cut through tough grease stoppages, and the flow to flush them away. In fact the J-3055 has the highest flow rate available without requiring a holding tank. It's driven by a 16 hp Briggs and Stratton Vanguard engine with electric start. The pump features Vibra-pulse® on demand, for getting the hose around tight bends.

Standard safety features include a thermal relief valve to protect the pump from heat damage, along with a back flow check valve and inlet filter. A 300 ft. capacity hose reel with brake and brass swivel is mounted on a heavy duty frame with four pneumatic tires. A wheel brake keeps the machine solidly positioned on the job. Complete with tool box, chemical injector, and spray wand with trigger.

LP fueled models available.

The J-3000 is great for large lines and long runs, as well as small lines. And it's much more powerful than smaller jets. A 3000 psi, 4 gallons per minute triplex pump with Vibra-pulse® on demand drives the hose easily around tight bends and down long runs. The pump is powered by a reliable 13 hp "Quiet Drive" Honda engine attached to a 2 to 1 gear reducer to extend the life of the pump. There's even an easy access control panel that lets you switch from jetting to pressure washing with the turn of a knob.

Standard safety features include a thermal relief valve to protect the pump from heat damage, along with a backflow check valve and inlet filter. A 300 ft. capacity hose reel with brake and brass swivel is mounted on a heavy duty frame with four pneumatic tires. A wheel brake keeps the machine solidly positioned on the job. Complete with tool box, chemical injector, and spray wand with trigger. Electric start, LP fueled, and 220v/3 phase models available.

The J-2900 is an economical alternative to the J-3000. It's lighter and more maneuverable, yet maintains the same pressure and flow rate as the J-3000. It's driven by an 11 hp Honda engine connected directly to a 3000 psi, 4 gallons per minute triplex pump with Vibra-pulse® on demand. A 300 ft. capacity hose reel with reel brake and brass swivel is mounted on a heavy duty frame with two pneumatic tires. The J-2900 has the same safety features as all of General's jets, including a thermal relief valve to protect the pump from heat damage, along with a back flow check valve and inlet filter. An optional spray wand is available.

This compact, easy-to-use jet generates 1500 psi at 1.7 gallons per minute, yet pulls only 13 amps. It's powered by a 1 1/2 hp dual capacitor sealed motor with an in-line ground fault circuit interrupter. The J-1400 is equipped with Vibra-pulse® on demand to work the hose around tight bends in small lines. This unique feature allows the flow rate to remain the same whether Vibra-pulse® is on or off.

Safety features include a thermal relief valve, inlet filter and back flow check valve.

An optional spray wand is available.

Slide the J-1400 onto a cart with a hose reel and you have the J-1600. The specially designed cart has a heavy duty frame and rolls on two pneumatic tires. The hose reel has big capacity and comes with an adjustable brake and brass swivel. You can store extra nozzles and tools in a handy metal tool box bolted onto the frame.

The J-1400 pump and motor assembly locks securely to the frame for transport, yet it can be removed from the frame in seconds when you need to work in tight spaces.

J-1450 Electric Jet

The J-1450 has the same drain cleaning power as our popular J-1600, but it's more compact. You can take this jet into some really tight spaces. And if you want to put it into a car trunk, you can take off the reel in seconds and load the machine in two pieces. Overall height is 32", and when you remove the 200 ft. capacity reel, the height drops to 14 1/2".

The telescoping handle on the J-1450 makes it easy to roll the machine to and from the job, and then slides out of your way when you're on the job. A low center of gravity keeps the J-1450 solidly in place while you work.

The J-1450 is powered by a 1 1/2 hp (13 amp) sealed motor with an in-line ground fault circuit interrupter. The dual capacitor motor is totally enclosed, so water won't harm it or pose a shock hazard.

A 1500 psi, 1.7 gallon per minute triplex pump is equipped with Vibra-pulse® to work the hose around tight bends in small lines. This unique feature allows the flow rate to remain the same whether Vibra-pulse® is on or off.

Safety features include a thermal relief valve to protect the pump from heat damage, as well as a backflow check valve and inlet filter.