World Dryer FEATURES, BENEFITS AND MOUNTING DIAGRAMS

Main - Plumbing - Bathroom - World Dryer Index - Series A - Features, Benefits and Mounting Diagrams

HAND DRYER PLANNING GUIDE

Quantity Estimate
Average traffic washroom - 1 dryer per 2 washbasins
Heavy traffic washroom - 1 dryer per washbasin
54" Bradley sink - 4 dryers per sink
Dryer Placement
Hand dryers should be placed at least 2 feet apart, near but not over the washbasin. In congested areas dryer should be placed to create a traffic flow from washbasin to dryer to exit.
Dryer Installation
Hand dryers require a dedicated circuit and must be properly grounded.
GFI Circuit protection is recommended.
One side of dryer should be mounted to stud.

Specification Guide - Model A, XA
Hand dryers shall be manufactured by World Dryer to include a 1/4" thick cast iron cover. Cover to be finished with porcelain enamel. Motor shall be of the universal type, 1/10 HP at 7500 RPM. Dryer shall deliver 7300 linear feet of air per minute (LFM). Hand Dryers shall be activated by means of a push button control device. Automatic Dryers shall be activated by means of an infrared emitting/receiving electronic control device. Timer shall be mechanical, cam-operated type. Recessed units will include a 16-gauge steel wall-mounting box. Hand dryer shall be listed under re-examination service of Underwriters' Laboratories, Inc., and certified by the Canadian Standards Association.

MODEL A/RA SERIES

Features and Benefits

Superior engineering ensures high performance
Quality materials provide maximum durability and vandal resistance
All Model A dryers deliver high air velocity (7300 linear feet per minute!) to ensure quick drying
Available in a wide variety of colors (see color chart below), both surface and recessed mount

Materials

Cover construction of 1/4" cast iron
Exposed areas are porcelain enameled
Two tamper-resistant screws lock cover securely to base
Internal parts are plated with corrosion-resistant material
Tamper-resistant air intake openings

Mechanisms

Push button models employ a durable cam-operated timer to operate dryer for 30 or 40 seconds after activation
Motors are universal type, 1/10 HP, 7500 RPM at rated load with resilient mountings and sealed, permanently lubricated ball bearings for durability and rapid drying
Dynamically balanced blower wheels for vibration-free running

Warranty

10 year limited parts warranty

MODEL A/XA SERIES MOUNTING DIAGRAM
SURFACE MOUNT *Refer to recommended mounting height table

MODEL XA/XRAM SERIES

Features and Benefits

When hands are present, dryer automatically activates with high air velocity (7300 linear feet per minute!) to ensure quick drying
With no buttons to push, the XA Series offers improved sanitation
Dryer automatically shuts off when hands are removed, conserving electrical costs
Available in a wide variety of colors (see color charts below), both surface and recessed mount

Materials

Cover construction of 1/4" cast iron
Exposed areas are porcelain enameled
Two tamper-resistant screws lock cover securely to base
Internal parts are plated with corrosion-resistant material
Tamper-resistant air intake openings

Mechanisms

Automatic dryers use reflective infrared sensors to detect hands, initiate and terminate drying
Motors are universal type, 1/10 HP, 7500 RPM at rated load with resilient mountings and sealed, permanently lubricated ball bearings for durability and rapid drying
Dynamically balanced blower wheels for vibration-free running

Warranty

10 year limited parts warranty

MODEL XA/XRAM SERIES MOUNTING DIAGRAM
RECESSED MOUNT *Refer to recommended mounting height table Back to Model A Series Main Page

Top of Page

Main Page

Place an Order

E-Mail