Supply and Shank Connection/Inlet Shanks

A great number of faucet requirements can be met by substituting supply connections for those regularly furnished. Any supply connection shown here will fit any faucet connection that is regularly furnished with any of them. (The supply connection regularly furnished on a faucet is stated in the description of the faucet).

When ordering a faucet with supply connection other than that regularly furnished, specify the connection number after the faucet number.

For example, if faucet 540 is wanted with 12" centers, the H supply arms should be substituted for the regularly furnished G supply arms. Order as 540-H.

Faucet bodies taking these supply connections have inlets either on 3-3/8" or 8" centers. Listed below are the maximum center to center of supplies possible with each style of connection with either body.

No.	Description	3-3/8" Bodies	8" Bodies
No.G	3/8" Centers	4-1/8"	8-3/4"
No.GC	3/8" Centers	4-1/8"	8-3/4"
No.H	2-1/2" Centers	8-3/8"	13"
No.HC	2-1/2" Centers	8-3/8"	13"
No.R	2-1/2" Centers-stop arm	8-3/8"	13"

All offset supply arms shown are polished chrome plate (CP). All can be furnished rough chrome plate (RCF).


G	H	R
3/8" offset with 1/2" NPT female inlet	2-1/2" offset with 1/2" NPT female inlet	2-1/2" offset with built-in shut-off stop and 1/2" NPT female inlet
Polished or rough chrome plate finish	Polished or rough chrome plate finish	Polished or rough chrome plate finish
GC same as above with integral check.	HC same as above with integral check.


1020	748-1K	748-2K
Fits faucets with 1/2" male NPSM straight thread on valve inlet	3-3/8" long inlet shank	2-13/16" long inlet shank
Inlet bored to take 1/4" tailpiece or flexible supply and threaded to take coupling nut	3/8" NPT male outlet	1/2" NPT male outlet
1/2" NPSM female straight thread outlet	1/2" NPSM inlet with coupling nut	1/2" NPSM inlet with coupling nut
Rough chrome plate finish	748-3K same as above except 4-1/2" inlet shank length.
1021 same as above except with 1/2" NPT female inlet and outlet.
STEDI-FLO: The 1020 and 1021 Stedi-flo valve mount directly on the inlet of the faucet or fitting. They are inconspicuous, yet readily accessible if service should be necessary. Both provide consistent 1.2 gallon per minute flow rate.


932-1K	957-3K	EA
1/2" x 3" long inlet shank	3/8" x 4-3/4" long inlet shank	1/2" NPT flanged female inlet shank with integral stop
Locknut and washer	Locknut and washer	Elbow on outlet for deck mounted fixtures with back inlet
	979-1K same as above except 2-5/8" inlet shank length.	Coupling nut
		E same as above less elbow. EC same as above less elbow with integral check.


EX5	WX
Long extension piece	Straight inlet shank without flange
Extends faucet body forward 5"	1/2" NPT female inlet
	For installation on exposed piping
	WXF same as above with flange.


SS	W	WXA
Tall angle inlet shank	Straight inlet shank	Angle inlet shank without flange
1/2" NPT flanged female inlet	1/2" NPT flanged female inlet	1/2" NPT female inlet
LS same as above but with 7-5/8" from inlet to center of outlet.	Polished or rough chrome plate finish	Recommended for installation on exposed piping
		Polished or rough chrome plate finish

Top of Page

Chicago Index

Main Page

Place an Order

E-Mail