Bronze, Full Port Ball Valves for Residential, Commercial and Industrial Applications
Excellent for throttling and balancing applications, the B6080/B6081 combines American craftsmanship with value.

Specifications
PTFE seats and seals. Bottom loaded, pressure retaining stem. Pressure rated at 400 WOG (non-shock).

No. B-6080 sizes 1/2"" - 2"" threaded ends

No. B6081 sizes 1/2"" - 2"" solder ends

Designed to be soft soldered without disassembly using a low temperature solder (420°F). Other solders, 95/5 tin/antimony (460°F) or 96/4 tin/silver (430°F) can be used, however, extreme caution must be exercised to prevent seat damage. Higher temperature solders will damage the seat material. ANSI B16.18 states that 50/50 solder sweat connections should not be subjected to greater than 200 psi at 100°F. Operating pressures should be decreased as temperatures are increased.

Features:
High cycle life reinforced PTFE stem packing seal and thrust washer

Adjustable stem packing gland

Individually tested, air under water, opened and closed position

Options:
(Suffix)
CL - Chain lever kit (3/4"", 1"")

GS - Grounded stem

OH - Oval handle, high profile

OL - Oval handle, low profile

RH - Round handle

SH - Stainless steel handle and nut

SS - Stainless steel ball and stem

TH - Tee handle

Z15 - Less lever and nut

01 - Virgin PTFE seat material

04 - Mineral-filled PTFE seats and seals (available in all 316SS ball and stem options)

 Click for DETAILS

                                                        Top of Page

                                                        Main Page

                                                        Place an Order

                                                         E-Mail