For Residential, Commercial, and Industrial Use
Provides an effective means for preventing piping systems from deteriorating due to corrosion caused by galvanic action and stray current. Standardly supplied with *GA gaskets, unless otherwise specified. U.S. made for unparalleled value.

Specifications
Unions rated at 250 psi and 180°F. Meets ANSI B16.39 requirements, including hydrostatic strength, tensile strength, and air pressure testing. All pipe threads in accordance with ANSI B2.1. Solder joints meet national plumbing standards.

Materials

Gray Iron	ASTM A-48-25
Malleable Iron Parts	ASTM A-197
Steel parts	ASTM A-107
Brass parts	ASTM B-16
Bronze parts	ASTM 844
Cadmium parts	ASTM A-165
Insulators	Watts #I425

*GA gaskets are suitable for use with water, air, oil, natural gas, propane, gasoline, kerosene, mineral oil, vegetable oil, and alkalies.

Specify suffix GB for use with steam to 300°F at 50 psi.

Note: to use either gasket material for other applications, please consult the factory.

Ins-Kit Bolt Insulators For insulating flange bolts:

Size	Order No
1/2""	889142
5/8""	889144
3/4""	889146
7/8""	889148
One insulator required for each bolt in a flange. For Residential, Commercial, and Industrial Use Provides an effective means for preventing piping systems from deteriorating due to corrosion caused by galvanic action and stray current. Standardly supplied with *GA gaskets, unless otherwise specified. U.S. made for unparalleled value. Specifications Unions rated at 250 psi and 180°F. Meets ANSI B16.39 requirements, including hydrostatic strength, tensile strength, and air pressure testing. All pipe threads in accordance with ANSI B2.1. Solder joints meet national plumbing standards. Materials Gray Iron ASTM A-48-25 Malleable Iron Parts ASTM A-197 Steel parts ASTM A-107 Brass parts ASTM B-16 Bronze parts ASTM 844 Cadmium parts ASTM A-165 Insulators Watts #I425 *GA gaskets are suitable for use with water, air, oil, natural gas, propane, gasoline, kerosene, mineral oil, vegetable oil, and alkalies. Specify suffix GB for use with steam to 300°F at 50 psi. Note: to use either gasket material for other applications, please consult the factory. Ins-Kit Bolt Insulators For insulating flange bolts: Size Order No 1/2"" 889142 5/8"" 889144 3/4"" 889146 7/8"" 889148 One insulator required for each bolt in a flange. Features: Meets federal specifications for tensile strength and thread end connections Factory certified to withstand minimum of 600 volts on a dry line with no flashover Rated at 250 psi conforming to ANSI B16.34 Watts Dielectric Flange Fittings are rated at 175 psi, conforming to B16.42 (iron), B16.24 (bronze) Designed and manufactured to highest quality standards  Click for DETAILS                                                         Top of Page                                                         Main Page                                                         Place an Order                                                          E-Mail