Water Hammer Arrestor
Helps eliminate annoying and potentially damaging water hammer caused by valves used in dishwashers, clothes washers, and other fast-closing, positive shutoff valves used in residential or commercial systems. The Watts Series 15 water hammer arrestors incorporate a permanent, pre-charged sealed air chamber to absorb the water shock.

Specifications
Sizes 1/2"" - 2"". Operates @ 150 psi. Installation: vertically, horizontally, or any other angle. Factory charged to 60 psi. Permanently capped, epoxy sealed. Temperature range 33°F to 180°F.
Standards: ASSE 1010 and ANSI A112.26.1M approved; PDI WH201 approved and certified; IAPMO listed.
No. 1-, 2-, 3-15AK adapter for installing 1-1/4"", 1-1/2"", and 2"" sizes respectively, in a 1"" NPT fitting.

Features:
Hard drawn copper bodies

EPDM seals and ""O"" rings

Brass piston and cap

 Click for DETAILS

                                                        Top of Page

                                                        Main Page

                                                        Place an Order

                                                         E-Mail