Main - Heating Index - Conbraco Index - Plumbing Index - Marine Valves

Apollo® Full Flow Sea Flange Valves

An 85-5-5-5 bronze ball valve-type developed to replace plug and other types of sea cocks in the boating industry. Features like these make the full flow Apollo® Sea Flange your best choice for long-lasting performance and value. Available in thread sizes 3/4" - 4".

Features:

• Underwriters Laboratories Listed.

• All Bronze Wetted Metallic Components.

• Large Flow Ports.

• Glass Reinforced TFE Seats And Seals.

• Chromium Plated Bronze Ball-Resists Damage From Marine Growth

• Manufactured On Sophisticated Highly Accurate Machine Tools To Exacting Quality Control Standards.

• Easy On-Off Operation.

• Winterizing Drain Plug.

• No Thumb Screws To Create Seal.

• Stainless Steel Lever And Nut.

• Compact, Streamlined Efficient Design.

• No Lubrication Required.

• Bonding Screw.

Apollo® Economy Sea Flange Valves

Same great features and quality all-bronze construction as Full Flow Sea Flange valves, but with standard port design and lower cost. Available in thread sizes 3/4" - 1-1/2".

5-Port Fuel Tank Selector Ball Valve

Model No. 78-125-01

Unique ball design allows for higher flow capacities. Perfect for tank selection on larger vessels. Five port construction allows access to four tanks using only one valve.

Features:

• Five 3/4" NPT Connections.

• 85-5-5-5 Bronze Ball Valve With Stainless Steel Lever And Nut.

• RTFE Seats And Stem Packing.

• Stem Packing Adjustable For Wear.

• Non-Lubricated.

• 50 PSIG Pressure Rating.

• Operation: Four Selected Inlets Feed One

• Common Outlet-Pointer On Handle Indicates The Selected Inlet.

• Easy Mounting Design.

Series 70-600/900-10 Three-Way Diverter Valve

Fuel tank selection, oil transfer, and water tank selection are only a few of the uses for this versatile diverter valve. Available in sizes 1/2" - 2".

Features:

• Bronze body.

• Chromium plated ball.

• Reinforced TFE seats and stuffing box ring.

• Stainless steel lever and nut.

• Mounting/Bonding Pads.

• Blow out proof stem design.

• 400 PSI service rating.

• Adjustable packing gland.

Ball Type Fuel Shut-Off Valve

Quality valve features "mounting ears" for quick easy installation, and positive mounting. Can also be used for bonding. Available in thread sizes 1/4" - 3/4".

Features:

• Surface Mounted.

• 400 PSI Service Rating.

• Glass Reinforced TFE Seats And Seals.

• All Wetted Metallic Parts Are Brass or Cast Bronze.

• Optional Tee Handle

• Fast 90° On-Off.

• Tested 100 PSI Air Under Water.

• Stainless Steel Lever And Nut.

• Optional With Stainless Steel Ball And Stem.

70-100-10 Series Shut-Off Valve

The mainstay of our valve line. Dependable and inexpensive, with a standard stainless steel lever and nut to withstand rugged marine environments. Available in thread sizes 1/4" - 3".

Features:

• Bronze Body.

• Chromium Plated Ball.

• Reinforced TFE Seats And Stuffing Box Ring.

• Blow-Out-Proof Stem Design.

• Meets WW-V-35C Type: II Composition: BRZ Style: 3.

• Stainless Steel Lever And Nut.

Options:

• 316 Stainless Steel Ball And Stem.

77-100-10 Series Shut-Off Valve

The bronze full port Apollo® with mounting pads for easy, secure installation and quick, convenient bonding. Use in any valve application where full flow is required. Available in thread sizes 1/4" - 2-1/2".

Features:

• Bronze Body.

• Chromium Plated Pall.

• Reinforced TFE Seats And Stuffing Box Ring.

• Blow-Out-Proof Stem Design.

• Meets WW-V-35C Type: II Composition: BRZ Style: 3.

• Stainless Steel Lever And Nut.

Options:

• 316 Stainless Steel Ball And Stem.

Stainless Steel Ball Cone Check Valve

62 Series

Prevents reverse flow with minimum change in flow velocity. Available in thread sizes 1/4" - 2".

Features:

• Tight shut off.

• No radial alignment necessary.

• Straight through and streamlined for minimum change in velocity.

• Ball-Cone check is spring loaded for fast seating action (constructed of reinforced TFE).

• U.S Patent #4,172,465.

• All wetted metal parts are 316 stainless steel.

• Not recommended for reciprocating pumps and similar applications involving repetitious vibrations.

• Optional light spring.

78-600 Series Bronze Valve with Center Drain

Center tap drain allows winterization of the valve. Bonding screw allows valve to be connected to the vessel's bonding system. Available in thread sizes 3/4" - 2".

Features:

• Bronze body.

• Chromium plated ball.

• Reinforced TFE seats and stuffing box ring.

• Blow-out-proof stem design.

• Stainless steel lever and nut.

• Mounting pads.

• Tapered Pipe Threads.